Automatically update

About ZW3D ZW3D, The All-in-one CAD/CAM, was included into ZWSOFT’s product portfolio in 2010.Below are some examples. Broken view: Used to create a gap or break in a view using a pair of broken lines.Example 2: Full section view with multiple section planes. * Automatically generate 2D drawing from solid and surface models* Automatically update the 2D drawing if the part has been changed* Automatically create standard and custom drawing fep sheet Manufacturers views as required.In 2D a sheet,define the type of section view as named 3D and another one named Bent. As the successor of VX CAD/CAM, ZW3D provides ease-of-use, performance, and all-in-one capability.

See following image.Example 1: Full section view with a single section planes.2D drawings are the main standard of machining and checking parts. Please go to http://zw3d. The brand new software can extend enterprise-level mechanical design and engineering capabilities to the desktop at a fraction of the cost of other comparable systems.Bent is used when sketch lines are beyond 90 degrees.Detail view: It is used to enhance details of the drawing.The one named 3D is used when sketch lines between 0 and 90 degrees are used. It’s very important for today’s manufacturing to have quality part information to go by. Example 4: Two intersectanting section plans to define the whole sectionNote: The intersection line of two section plans must coincide with the axis of rotational part.Example 3: Named Section Curves in 3D modeling.You will appreicate the ease with which you can create the many types of views in ZW3D. Experience ZW3D 2010, where the only limit is your imagination. This makes it possible to display a large part within a drawing view that it normally it would not fit inside of.Full section view: Can be created on both simple and complex shapes. Use this commmand to create circular and rectangular detail views from other layout views.zwcad.